Block Patterns:McCunn

This page contains changes which are not marked for translation.

Block Patterns : McCunn

Measurements Edit

Like all patternmaking systems, the McCunn system is defined by the measurements that Don McCunn chose to use. The McCunn system uses inches, but if your measurement file has centimeters and it contains all the measurements used by the McCunn system then SeamlyMe will automatically convert it into inches.

Measurements File Edit

Here is a sample measurement file for the McCunn system -- McCunn_sample.vit.

Measurements Table Edit

This table lists the measurements used in the McCunn system and maps them to SeamlyMe measurement names:

McCunn Measurement	SeamlyMe Measurement	SeamlyMe Image
Arm length	arm_shoulder_tip_to_wrist_bent	L01
Shoulder to Elbow length	arm_shoulder_tip_to_elbow_bent	L02
Sleevecap length	arm_shoulder_tip_to_armfold_line	L16
Biceps	arm_upper_circ	L11
Palm	hand_palm_circ	D04

Block Patterns Edit

The McCunn block patterns were developed to work with woven fabrics.

Block Patterns Table Edit

Here are the block patterns from the McCunn patternmaking system:

Pattern Type	Pattern File (.val)	Tutorial page
Sleeve	McCunn_basic_sleeve_details.val	Block_Patterns:McCunn:Sleeve