UserManual:Tools:Points: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
Line 128:
<!--T:7-->
===Point - Length to Line (Shortcut P, S)===
{|
|[[File:Shoulder.svg|50x50px]]
|Create a new node along a line at a distance from an axis node
|-
|
|First select a starting point from which your length will be measured. Than select two points of a line. The new node will be created on the extention of your selected line.
|-
|[[File:Advice.svg|50x50px]]
|'''Important note:'''If the given length is to short the resulting point will be the same as the last point of theline you selected
|-
|
|
*Name: Name of the new node
*First point: First point of the line to extend. It's the '''second''' point you selected
*Second point: Second point of the line to extend. It's the '''third''' point you selected
*Third point: Starting point It's the '''first''' point you selected
*Lenght: You can define a fixed lenght or use formulas for adaptive / calculated values.
*Attributes: Specify the color, linetype and lineweight of the new node
|-
|
|[[File:Seamly2d DrawModeTools08b.png|300x300px]]
|-
|
|[[File:Seamly2d DrawModeTools08c.png|300x300px]]
|-
|
|[[File:Seamly2d DrawModeTools08.png|433x433px]]
|}
<!--T:8-->
===Point - Intersect Arc and Line (Shortcut A, L)===
Select the first and second points of the axis line (in this case, point A10 and A11 on the line indicating the shoulder tip height). Then select the point at the centre of the radius that you wish to measure out from (in this case, A9 - the edge of the neck). The box pops up and you may enter the length of the line from A9 to the new point (A12) that you require (shoulder width + the dart width). You may draw in a line from point A9 to A12 which will equal length that you entered.
| |||