UserManual:Tools:Points: Difference between revisions
Content deleted Content added
No edit summary |
No edit summary |
||
Line 128: | Line 128: | ||
<!--T:7--> |
<!--T:7--> |
||
===Point - Length to Line (Shortcut P, S)=== |
|||
===[[File:Gt00005.jpg|50px]] Tool Special point on shoulder=== |
|||
{| |
|||
This one may be a little difficult to explain but I'll use my marks to help. You have a label at the shoulder point against the neck (A9) and a line below it to indicate the height of the shoulder tip (A10 to A11) to indicate where the chest joins the arm is situated. You'd like to draw a line from A9 to the shoulder tip plus you'd like to include the width of the dart. You click on A9, A10 and A11. The box will pop up and you may enter the formula for the shoulder width + the dart width. This will place a label point (A12) beyond A11 (in line with A10 to A11) where the line A9 to A12 will be the same length of the sum of the shoulder width + the dart width (in this case 1cm). You can now draw the line from A9 to A12 if you wish. |
|||
|[[File:Shoulder.svg|50x50px]] |
|||
|Create a new node along a line at a distance from an axis node |
|||
[[File:Gt00025.jpg]] |
|||
|- |
|||
| |
|||
<span style="color: red;">If the distance between A9 and A12 is less than the pointer A11, it will revert to point A11 and the Point at intersection of arc and line will be the tool to use.</span> |
|||
|First select a starting point from which your length will be measured. Than select two points of a line. The new node will be created on the extention of your selected line. |
|||
|- |
|||
|[[File:Advice.svg|50x50px]] |
|||
|'''Important note:'''If the given length is to short the resulting point will be the same as the last point of theline you selected |
|||
|- |
|||
| |
|||
| |
|||
*Name: Name of the new node |
|||
*First point: First point of the line to extend. It's the '''second''' point you selected |
|||
*Second point: Second point of the line to extend. It's the '''third''' point you selected |
|||
*Third point: Starting point It's the '''first''' point you selected |
|||
*Lenght: You can define a fixed lenght or use formulas for adaptive / calculated values. |
|||
*Attributes: Specify the color, linetype and lineweight of the new node |
|||
|- |
|||
| |
|||
|[[File:Seamly2d DrawModeTools08b.png|300x300px]] |
|||
|- |
|||
| |
|||
|[[File:Seamly2d DrawModeTools08c.png|300x300px]] |
|||
|- |
|||
| |
|||
|[[File:Seamly2d DrawModeTools08.png|433x433px]] |
|||
|} |
|||
<!--T:8--> |
<!--T:8--> |
||
===Point - Intersect Arc and Line (Shortcut A, L)=== |
|||
===[[File:Gt00006.jpg|50px]] Tool Point at intersection of arc and line=== |
|||
Select the first and second points of the axis line (in this case, point A10 and A11 on the line indicating the shoulder tip height). Then select the point at the centre of the radius that you wish to measure out from (in this case, A9 - the edge of the neck). The box pops up and you may enter the length of the line from A9 to the new point (A12) that you require (shoulder width + the dart width). You may draw in a line from point A9 to A12 which will equal length that you entered. |
Select the first and second points of the axis line (in this case, point A10 and A11 on the line indicating the shoulder tip height). Then select the point at the centre of the radius that you wish to measure out from (in this case, A9 - the edge of the neck). The box pops up and you may enter the length of the line from A9 to the new point (A12) that you require (shoulder width + the dart width). You may draw in a line from point A9 to A12 which will equal length that you entered. |
||