Sleeve Block, McCunn System: Difference between revisions
Content added Content deleted
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
===Measurements=== <!--T:2--> |
===Measurements=== <!--T:2--> |
||
The sleeve block, like all Valentina patterns is based on measuments of the intended wearer. Measurements must be recorded using the TAPE program (see [[Tape | Tape User Manual]]). |
|||
The following Valentina measurements are required to construct a sleeve block using the McCunn method. |
The following Valentina measurements are required to construct a sleeve block using the McCunn method. |
||
| Line 16: | Line 17: | ||
* L02 arm_shoulder_tip_to_elbow_bent |
* L02 arm_shoulder_tip_to_elbow_bent |
||
Before attempting to draft a sleeve pattern with this method, ensure that you have created and saved a measurement file (.vit) which contains values for L01, L02, L11, L16, and D04. |
Before attempting to draft a sleeve pattern with this method, ensure that you have created and saved a measurement file (.vit) which contains values for L01, L02, L11, L16, and D04. |
||
The instructions for drafting a basic sleeve may be found on pages 71-75 in the 1977 revised edition or pages 79-82 in the 2016 second edition. In the McCunn method, the five measurements required to draft a basic sleeve are called |
The instructions for drafting a basic sleeve may be found on pages 71-75 in the 1977 revised edition or pages 79-82 in the 2016 second edition. In the McCunn method, the five measurements required to draft a basic sleeve are called |
||